Blink LED

In this tutorial we are going to see how to blink 4 different color LEDs on Nirmiti base shield.

There are 4 LEDs on Nirmiti base shield. In the following image, there are 4 LEDs below label 'एलईडी' .

Nirmiti Board mounded on Nirmiti Base Shield

Blocks We are Going to Use:

You can get 'LED status chage' block in 'other' catagory.

'LED status chage' block is shown in the below image . In this block , we need to select LED and its status (ON or OFF).

Example

Output on board

Blink_LED

.txt

Download TXT • 3KB